Product Gallery
Applegate EDM: The Cutting Edge in EDM
What can we build for you?
Here are samples of some of the work we have done for others. Whether it be Aluminum or Zirconium or anything in between - we can handle all of your metal cutting needs. We can also handle non-metallic materials that conduct electricity. If it is conductive, we can cut it!
|
|
|
|
Hole Drill .045”dia. +/- .004” Angled holes in Inconel Vane. |
Sinker EDM 3 side holes in 20”dia. Bearing for greasing of inner rollers. |
|
|
|
|
Wire EDM cut using a .012”dia. wire. This was machined with one program & one complete cut. |
Hole Drilled ten .090”dia. holes 4.50” deep into Inconel casting within +/- .004” |
|
|
|
|
EDM Hole Drill .05”dia. x 15” deep, & Wire EDM. |
Wire EDM extrusion die using .010” wire. |
|
|
|
|
Wire EDM three section of assembly using .004” wire. |
Wire EDM at 25° angle Gear teeth within .0005”. |
|
|
|
|
Wire EDM A2 after Heat Treated to 60-62 RC |
Wire EDM complete with .008” wire and using one pass/cut around Die area. |
|
|
|
|
Sinker EDM to remove pressed carbide inserts from oil field drill bit. |
Example of completed oil field drill bit with all the carbide inserts removed. |
